Menu
Log in


Join
Log in

NRG Workshop: Using the Table Saw Safely

  • December 11, 2021
  • 10:00 AM - 11:00 AM
  • Online

Registration

  • Registration for those who are not members of the NRG.
  • Registration for current NRG members. You may need to be logged into your NRG account to register as a member.

Using the Table Saw Safely

Registration for this event has closed.

The safe use of smaller table saws, like the Byrnes saw, will be the subject of the presentation.  Though smaller than full-sized table saws, model-sized saws can still take a finger off or severely injure the modeler if they are used in an unsafe manner.   

Kurt will show how to perform rip cuts, cross cuts, lap joints, miters and other common operations in a safe and efficient manner.  Many modelers say they are totally intimidated by the dangers of the table saw and that they are hesitant to use the saw they purchased.  After this program, these modelers should be less hesitant to use their saw.   And those modelers who routinely use their saws will appreciate the tips on proper saw set-up.   

At a minimum this presentation will provide a helpful review of safety tips and might even prevent an injury due to complacency.

Plan to attend the next NRG Virtual Workshop on Saturday, December 11, 2021, at 10:00 AM CST entitled "Using the Table Saw Safely".   Presented by NRG Director Kurt Van Dahm.  This is an updated version of Kurt's talk which was presented at the 2018 NRG Conference in Las Vegas.  As usual this event is free to NRG members while others can attend for the bargain price of $5.00.

Details

  • Date: Saturday, December 11, 2021 at 10:00am Central
  • Location: Online, attend using your computer or tablet.
  • Registration: Advance registration required.
  • Cost: Free for current NRG members, $5 for non-members

About NRG Online Workshops

These workshops are presented online.  You can attend from anywhere in the world, all you need is a computer, tablet, or mobile device.  You'll be able to watch the presentation and ask questions during the Q&A period.  NRG members can typically view a recording of the workshop later.

NRG workshops are FREE to current NRG members.  

Not an NRG member?  Click here for information on joining!

After you complete registration, you'll receive an email with a link to attend the workshop.  Just click that link at 10am Central on December 11, 2021 to attend.

Powered by Wild Apricot Membership Software